热油会因热裂解和氧化而降解。由于积碳，油降解的两种副产品是油泥和焦炭。这些产品可能会聚集在您的整个系统中，但特别是在泵密封件和内部构件、阀门等中，会导致设备问题并可能最终导致系统故障。在没有适当过滤的情况下持续累积污染物也可能对系统的加热表面有害，从而降低传热效率。Hot Oils degrade by thermal cracking and oxidation. The two by-products of oil degration is sludge and coke due to carbon build-up. These products can collect throughout your system, but specifically in pump seals and internals, valves, etc. that result in equipment problems and possibly eventual system breakdown. The continuous contaminant build-up without proper filtration can also be detrimental to heating surfaces of your system, thereby reducing heat transfer efficiency.

The other important factor to consider is additional cost entailed from more rapid hot oil breakdown. This can include not only increased hot oil replacement, but higher labor man-hours due to increased maintenance and repair time and the cost of replacement parts such as seals, valves, rotors, and mag-drive canisters, thereby costs can quickly become considerable.

Filtration Benefits 

• Extend Service Life of the Hot Oil
• Reduction of System Maintenance
• Reduction of Wear and Tear on Seals
• Improve Heat Transfer Efficiency
• Reduces Sludge Build-Up, Thereby Improving Viscosity of Fluid
• Design for Operation up to 650°F
• Swing-Bolt Lid for Easy Cartridge Change-Out
• Improved Flow-Rates/Throughput Due to Reduced Contamination Build-Up
  

Typical Unit Dimensions

• Width: 36 inches
• Diameter: 60 inches
• Height: 48 inches

Available Cartridge Sizes:

• 100-150 Micron
• 75 Micron
• 40 Micron
• 30 Micron
• 20 Micron
• 15 Micron
• 10 Micron