Advantages:
Very good sealing of the mold against the release agent
Perfectly compatible with Acmoscoat 82-9062
The parts get high surface energy for better post-treatment
Low build-up on mold, very sticky coating.
Processing:
Before the first use, the molds should be thoroughly cleaned of separating agents, dirt and grease residues. After mechanical cleaning, we recommend using the ACMOSOL 130-22 mold cleaner.
A suitable and resistant separating coating can only be created on clean surfaces of the molds.
Before the first use, three thin layers should be applied to the mold using a cloth or spraying equipment at intervals of 3-5 minutes.
Storage:
Ideal temperature: between 10 ° C and 30 ° C, do not leave the container open.
Usage time: about 6 months
...